Regulators – Corrosive & Toxic
The 400 Series SilcoNert 1020 coated regulators are intended for primary pressure control of reactive or corrosive calibration mixtures or pure gases in applications where an extreme inert wetted finish is required. The proprietary non-reactive amorphous silicon finish is desired over standard 316L stainless steel and ideally suited for H2S, reduced sulphur, mercury and PPM to PPB calibration mixtures.
Key Features – Single Stage, SilcoNert 1020 Coated Body/Diaphragm/Internals, 316L Stainless Steel Barstock Body, Six Port Configuration, Inert Surface Finish and Corrosive Resistance.
Typical Applications – Reactive calibration standards, emission monitoring, H2S PPM to PPB standards, Mercury standards, Sulphur mixtures and Corrosive service.
Key Features – Dual Stage, SilcoNert 1020 Coated Body/Diaphragm/Internals, 316L Stainless Steel Barstock Body, Six Port Configuration, Inert Surface Finish and Corrosive Resistance.
Typical Applications – Reactive calibration standards, emission monitoring, H2S PPM to PPB standards, Mercury standards, Sulphur mixtures and Corrosive service.
Key Features – Single Stage, Electroless Nickel-Plated Forged Body and Corrosive Resistance.
Typical Applications – Hydrogen Chloride, Chlorine, Boron trichloride, Hydrogen bromide, Hydrogen sulphide and Dichlorosilane.
Snapshot of the 430 SilcoNert
The 430 Series SilcoNert 1020 coated regulators are intended for pressure control of reactive or corrosive calibration mixtures or pure gases in applications where an extreme inert wetted finish is required along with stable delivery pressure regardless of inlet pressure. The proprietary non-reactive amorphous Silicon finish is desired over standard 316L stainless steel and ideally suited for H2S, reduced Sulfur, Mercury and PPM to PPB calibration mixtures.
Key Features
- Dual Stage
- SilcoNert™ 1020 Coated Body, Diaphragm, and Internals
- 316L stainless steel Barstock Body
- Six Port Confi guration
- Inert Surface Finish and Corrosion Resistance
Typical Applications
- Reactive calibration standard
- Emissions monitoring
- H2S PPM to PPB standards
- Mercury standards
- Sulfur mixtures
- Corrosive gases
Features
- Metal-to-Metal Diaphragm Seal – No possibility of gas contamination
- Capsule® Seat – Increased serviceability and life
- Stainless Steel Barstock Body – Increased corrosion resistance
- Front and Rear Panel-Mountable – Versatile system configuration
- Pressure Ranges 0-15 to 0-500 PSIG – Broad range of applications
- Pipe Away Relief Valve – Safely vents exhaust gases
Materials
- Body – 316L stainless steel barstock
- Bonnet – Chrome-plated brass barstock
- Seat – PTFE, PCTFE with 4500 PSIG inlet option
- Filter – Patented 10 micron 316 mesh
- Diaphragm – 316L stainless steel Internal Seals – PTFE
Specifications
- Maximum Inlet Pressure – 3000 PSIG (210 BAR), 4500 PSIG (310 BAR) optional
- Temperature Range – -40°F to 140°F (-40°C to 60°C)
- Gauges – 2″ diameter stainless steel (bourdon tube not coated)
- Ports – 1/4” FPT
- Helium Leak Integrity – 1 x 10-9 scc/sec
- Cv – 0.1 Weight (432 2021-580) – 5.09 lbs. (2.31 kg)
Great Britain
Germany
Netherlands
Greece
North Macedonia